Latest topics
feeds
Metal Bronzee
+47
beckham23
rainbow
weehong
b0yc0tt
The Blue Cruiser
kia_cerato_forte
kenincf
octane99
aural
Potatoes
NiVleK
astroboy28
zhuzhumao
lakopi
chamot16
mighty meow
zujzuj
Kiang
kevinhwc
Mahinda
Forte899
duncton
kqkhlj
mehmehhh
Fortessimo
Divine
greatgazoo
jl1500k
melburn
mott3h
kapitan
tiny
joepele
Spiritseye
kysoong
arkaraka
ong
Juz@kid
ericsoon72
dubdew
keigo
Fortei
turbo4ev
inhalerz
muff
Cypher
pessimizt
51 posters
Page 6 of 10
Page 6 of 10 • 
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Re: Metal Bronzee
by kqkhlj 12th September 2009, 9:03 pm
pessimizt wrote:Just now went to LK to ask the tech to help to check if engine oil is too much.
He then checked and showed me that the engine oil level is within the 2 dots and is fine. I asked him that there are some oil marks above the markings at the side of the metal piece and he said those are not considered.
Sigh....but my FC is still not so good.
Travelling pattern is 60/40 or sometime 50/50 (highway / city).
Averagely i can get is 10km/l.
Mine is EX(A) and everything is stock.
Driving pattern is rev till 2k for first few gears (in urban driving).
Highway max going at 100km/h (rev around 2.5k)
Never hit 3k rpm before as its still run-in.
Mileage is just over 3k now.
Hmm.....hoping FC will improve after 6k servicing......
bro, have you tried to draw out some oil, er... i don't think need to fill until full full loh.
kqkhlj- Junior Member
Re: Metal Bronzee
by pessimizt 13th September 2009, 12:16 pm
Just gotten a bottle of rain vision and used half bottle with 1.5l of plain water with the help of Kevin. Will monitor and review the product. Going to get those spray container to mix up a little of the solution and apply on the side n back mirrors.
pessimizt- Senior Member
Re: Metal Bronzee
by pessimizt 13th September 2009, 12:22 pm
i dont know how to draw the engine oil out. But i did a check on the tyres and the pressure dropped to 190+ kpa in almost 3wks after 1k servicing. I quickly pump to 220kpa. I wonder if the technician check it in the first place. Am monitoring this 1 to 2 tank of fuel. Will be checking the pressure every 2 weeks of driving now.kqkhlj wrote:pessimizt wrote:Just now went to LK to ask the tech to help to check if engine oil is too much.
He then checked and showed me that the engine oil level is within the 2 dots and is fine. I asked him that there are some oil marks above the markings at the side of the metal piece and he said those are not considered.
Sigh....but my FC is still not so good.
Travelling pattern is 60/40 or sometime 50/50 (highway / city).
Averagely i can get is 10km/l.
Mine is EX(A) and everything is stock.
Driving pattern is rev till 2k for first few gears (in urban driving).
Highway max going at 100km/h (rev around 2.5k)
Never hit 3k rpm before as its still run-in.
Mileage is just over 3k now.
Hmm.....hoping FC will improve after 6k servicing......
bro, have you tried to draw out some oil, er... i don't think need to fill until full full loh.
pessimizt- Senior Member
Re: Metal Bronzee
by kqkhlj 14th September 2009, 9:59 am
bro, just curious, does your car comes with the engine temperature gauge? that stuff used to measure our engine temperature.
kqkhlj- Junior Member
Re: Metal Bronzee
by pessimizt 14th September 2009, 10:24 am
kqkhlj, i think EX doesnt come with the gauge.
I have asked around some SX owners and they said there is a gauge for engine when pressing on the 'trip' button. I have not really see it before but i did read in the manual that some models of Forte doesnt comes with the indicator.
And mine (EX) doesnt have.
I have asked around some SX owners and they said there is a gauge for engine when pressing on the 'trip' button. I have not really see it before but i did read in the manual that some models of Forte doesnt comes with the indicator.
And mine (EX) doesnt have.
pessimizt- Senior Member
Re: Metal Bronzee
by kqkhlj 14th September 2009, 10:35 am
pessimizt wrote:kqkhlj, i think EX doesnt come with the gauge.
I have asked around some SX owners and they said there is a gauge for engine when pressing on the 'trip' button. I have not really see it before but i did read in the manual that some models of Forte doesnt comes with the indicator.
And mine (EX) doesnt have.
ok, thanks, i go fix 1 when i get my car.
kqkhlj- Junior Member
pessimizt- Senior Member
Re: Metal Bronzee
by joepele 14th September 2009, 12:01 pm
..........
Why do you need that Temp thing for??
If you have coolant in the car... that thing is quite useless unless you plan to "wack" your car...
Why do you need that Temp thing for??
If you have coolant in the car... that thing is quite useless unless you plan to "wack" your car...
joepele- Senior Member
Re: Metal Bronzee
by pessimizt 14th September 2009, 12:07 pm
no 'wack' lah....just in case there is leakage or the coolant is not cooling the engine enough....at least have some indicator. if not, i really dont know if the coolant is really cooling the engine. 
pessimizt- Senior Member
Re: Metal Bronzee
by joepele 14th September 2009, 12:23 pm
pessimizt wrote:no 'wack' lah....just in case there is leakage or the coolant is not cooling the engine enough....at least have some indicator. if not, i really dont know if the coolant is really cooling the engine.
But honestly lor... chances of that happening is quite remote lor.
Anyway, for the SX... it's not like it's always there also... half the time, most of the SX owners would be looking @ the FC meters or ODO meters... Dun think may of them will bother about the temp.
joepele- Senior Member
pessimizt- Senior Member
Re: Metal Bronzee
by kqkhlj 14th September 2009, 1:22 pm
pessimizt wrote:Indeed very rare but just in case mah.
we go JB together to source for it when my car is here loh, now my car's location still unknown...
kqkhlj- Junior Member
Re: Metal Bronzee
by pessimizt 17th September 2009, 9:11 pm
Me just done CS-II this noon.
Send in at 1:30pm, collected back at about 5:30pm.
Compared with joepele's ride like not much difference.
Maybe because its drizzling a little.
But the feel (silkyness) of the CS-II is nice.
The staff told me they are giving me 24months warranty.
My current shine is 91 (they used a gauge to measure). If it drops more than 10% (82) within 24 months, they will redo the CS-II application FOC.
Other than that, they reminded me to remove all tree saps, bird droppings within 24 hours (by using plain water and cloth) to prevent it from eating into the PPS.
They also gave me 2 bottles of solutions (shampoo and protectant). Its to be used every other 3 to 4 car wash (monthly ?)
Send in at 1:30pm, collected back at about 5:30pm.
Compared with joepele's ride like not much difference.
Maybe because its drizzling a little.
But the feel (silkyness) of the CS-II is nice.
The staff told me they are giving me 24months warranty.
My current shine is 91 (they used a gauge to measure). If it drops more than 10% (82) within 24 months, they will redo the CS-II application FOC.
Other than that, they reminded me to remove all tree saps, bird droppings within 24 hours (by using plain water and cloth) to prevent it from eating into the PPS.
They also gave me 2 bottles of solutions (shampoo and protectant). Its to be used every other 3 to 4 car wash (monthly ?)
pessimizt- Senior Member
Re: Metal Bronzee
by mighty meow 18th September 2009, 11:52 am
pessimizt how much did you pay for the CSII?? also i heard form some members saying that the CSII wash for a few times the shine will be there but the silkness feel will no longer be there already.. itss true? also whats your package like? need to pay any more $$ when u go back to them again for the car wash or maintance thingy??
mighty meow- Member
Re: Metal Bronzee
by pessimizt 18th September 2009, 1:06 pm
Hello mighty meow,
i paid $256 (after discount).
Yes i also heard that the silkyness will be gone after 1 week or so. If want it to come back, have to either do-it-yourself (using the protectant they gave) or go back to them and pay $10 (includes car wash and vacuum). You can check out their link : http://www.unique1995.com.sg/CSii/ourrate.html
The optional maintenance should be for reapplying of CS-II coating after 24months and its @ $50. (Just checked with Unique and they told me the re-application is $192.00 and comes with 18 months warranty)
I think the paint protection system (PPS) main purpose is not the silkyness but the protection and shine. I am happy that they are giving 24 months warranty (it comes in a warranty card) for the shine (they will redo for free if the shine drops more than 10%). But come to think of it, i did not do the shine test before they start applying and so i do not know what is the original shine level for new cars.
i paid $256 (after discount).
Yes i also heard that the silkyness will be gone after 1 week or so. If want it to come back, have to either do-it-yourself (using the protectant they gave) or go back to them and pay $10 (includes car wash and vacuum). You can check out their link : http://www.unique1995.com.sg/CSii/ourrate.html
The optional maintenance should be for reapplying of CS-II coating after 24months and its @ $50. (Just checked with Unique and they told me the re-application is $192.00 and comes with 18 months warranty)
I think the paint protection system (PPS) main purpose is not the silkyness but the protection and shine. I am happy that they are giving 24 months warranty (it comes in a warranty card) for the shine (they will redo for free if the shine drops more than 10%). But come to think of it, i did not do the shine test before they start applying and so i do not know what is the original shine level for new cars.
Last edited by pessimizt on 18th September 2009, 6:55 pm; edited 1 time in total
pessimizt- Senior Member
Re: Metal Bronzee
by duncton 18th September 2009, 6:22 pm
pessimizt bro is correct. CS-II is mainly to protect the paint of your car. not for you to feel shiok from the silky touch. [quite disturbing if I see ppl keep molesting their car] haha...
anyway, like our human skin. no matter how silky and smooth it is. after extreme and constant exposure to the elements, the silkiness will of course not last. nonetheless, after a wash, you will still see the shine.
anyway, like our human skin. no matter how silky and smooth it is. after extreme and constant exposure to the elements, the silkiness will of course not last. nonetheless, after a wash, you will still see the shine.
duncton- Junior Member
Re: Metal Bronzee
by chamot16 18th September 2009, 9:52 pm
pessimizt wrote:Hello mighty meow,
I think the paint protection system (PPS) main purpose is not the silkyness but the protection and shine. I am happy that they are giving 24 months warranty (it comes in a warranty card) for the shine (they will redo for free if the shine drops more than 10%). But come to think of it, i did not do the shine test before they start applying and so i do not know what is the original shine level for new cars.
Hi bro, they should have done a 'shine % test' in your presence when you collect your car. Maybe you wanna call and ask them about it.
chamot16- Junior Member
Re: Metal Bronzee
by pessimizt 18th September 2009, 10:01 pm
Hi chamot16, yes they did a shine test in front of me when i collected my car. But they did not do the test when i send it in. So i am not sure what is the shine level originally.
pessimizt- Senior Member
Re: Metal Bronzee
by zujzuj 23rd September 2009, 1:28 am
bro pessimizt,
ask u...did ur FC improve recently ?
ask u...did ur FC improve recently ?
zujzuj- Newbie
Re: Metal Bronzee
by pessimizt 23rd September 2009, 8:33 am
Not really zujzuj, here is the update:
Seems to be improving but suddenly dropped again.
I think could be my driving pattern. Tends to rev slightly more when moving off but still trying to maintain within 2500rpm.
And i also let my wife drive which might contribute to the different driving pattern too.
| Petrol pumped (litres) | Mileage before pump (km) | Fuel Consumption (km/l) | Remarks |
| 37.36 | 0.00 | 0.00 | Esso 5000 |
| 37.62 | 425.00 | 11.30 | Esso 5000 |
| 39.42 | 424.00 | 10.76 | Esso 5000 |
| 43.33 | 425.40 | 9.82 | Esso 5000 |
| 45.32 | 440.70 | 9.72 | Esso 5000 |
| 45.96 | 489.70 | 10.65 | Esso 2000 |
| 46.25 | 502.30 | 10.86 | Esso 2000 |
| 38.80 | 445.50 | 11.48 | Esso 2000 - Tyre Check |
| 41.91 | 434.20 | 10.36 | Esso 2000 - Tyre Check |
Seems to be improving but suddenly dropped again.
I think could be my driving pattern. Tends to rev slightly more when moving off but still trying to maintain within 2500rpm.
And i also let my wife drive which might contribute to the different driving pattern too.
pessimizt- Senior Member
Re: Metal Bronzee
by pessimizt 29th September 2009, 5:31 pm
Found these in my mail 2 weeks ago compliments from CNC.
pessimizt- Senior Member
Re: Metal Bronzee
by pessimizt 29th September 2009, 5:33 pm
From this pic, the Toyota Crown is huge !
pessimizt- Senior Member
Re: Metal Bronzee
by joepele 29th September 2009, 6:16 pm
pessimizt wrote:From this pic, the Toyota Crown is huge !
Actually I was told that in Japan...
You'll see more crown than Mercs there...
joepele- Senior Member
Re: Metal Bronzee
by lakopi 29th September 2009, 6:24 pm
pessimizt wrote:Hi chamot16, yes they did a shine test in front of me when i collected my car. But they did not do the test when i send it in. So i am not sure what is the shine level originally.
When i collected my car after CS-II, they did a shine test in front of me and note it down on the warranty card. So check your warranty card then... mine is 96% ... so if next measure (within the warrant period) it drops to 85%, i can ask them for CS-II application FOC...
lakopi- Newbie
Re: Metal Bronzee
by pessimizt 30th September 2009, 9:13 am
Hi lakopi, did they do a shine test for you before CS-II ?
They did not do on mine so would like to check with other bros who had done or doing CS-II, please get them to do shine test BEFORE CS-II and update. Thanks in advance !
They did not do on mine so would like to check with other bros who had done or doing CS-II, please get them to do shine test BEFORE CS-II and update. Thanks in advance !
pessimizt- Senior Member
Re: Metal Bronzee
by pessimizt 30th September 2009, 9:16 am
joepele wrote:pessimizt wrote:From this pic, the Toyota Crown is huge !
Actually I was told that in Japan...
You'll see more crown than Mercs there...
They support the local productions !
pessimizt- Senior Member
Re: Metal Bronzee
by zhuzhumao 30th September 2009, 9:41 am
pessimizt wrote:Not really zujzuj, here is the update:
[table:6ea7 x:str="" style="border-collapse: collapse; width: 340pt;" border="0" cellpadding="0" cellspacing="0" width="452"] [tr style="height: 25.5pt;" height="34"] [td class="xl24" style="height: 25.5pt; width: 67pt;" height="34" width="89"]Petrol
pumped (litres)[/td] [td class="xl24" style="width: 77pt;" width="103"]Mileage before pump (km)[/td] [td class="xl25" style="width: 83pt;" width="110"]Fuel Consumption (km/l)[/td] [td class="xl27" style="width: 113pt;" width="150"]Remarks[/td] [/tr] [tr style="height: 12.75pt;" height="17"] [td class="xl26" style="height: 12.75pt;" x:num="" height="17"]37.36[/td] [td class="xl26" x:num=""]0.00[/td] [td class="xl26" x:num="" x:fmla="=B2/A2"]0.00[/td] [td class="xl28"]Esso 5000[/td] [/tr] [tr style="height: 12.75pt;" height="17"] [td class="xl26" style="height: 12.75pt;" x:num="" height="17"]37.62[/td] [td class="xl26" x:num=""]425.00[/td] [td class="xl26" x:num="11.29718234981393" x:fmla="=B3/A3"]11.30[/td] [td class="xl28"]Esso 5000[/td] [/tr] [tr style="height: 12.75pt;" height="17"] [td class="xl26" style="height: 12.75pt;" x:num="" height="17"]39.42[/td] [td class="xl26" x:num=""]424.00[/td] [td class="xl26" x:num="10.755961440892948" x:fmla="=B4/A4"]10.76[/td] [td class="xl29"]Esso 5000[/td] [/tr] [tr style="height: 12.75pt;" height="17"] [td class="xl26" style="height: 12.75pt;" x:num="" height="17"]43.33[/td] [td class="xl26" x:num=""]425.40[/td] [td class="xl26" x:num="9.8176782829448417" x:fmla="=B5/A5"]9.82[/td] [td class="xl29"]Esso 5000[/td] [/tr] [tr style="height: 12.75pt;" height="17"] [td class="xl26" style="height: 12.75pt;" x:num="" height="17"]45.32[/td] [td class="xl26" x:num=""]440.70[/td] [td class="xl26" x:num="9.7241835834068837" x:fmla="=B6/A6"]9.72[/td] [td class="xl29"]Esso 5000[/td] [/tr] [tr style="height: 12.75pt;" height="17"] [td class="xl26" style="height: 12.75pt;" x:num="" height="17"]45.96[/td] [td class="xl26" x:num=""]489.70[/td] [td class="xl26" x:num="10.654917319408181" x:fmla="=B7/A7"]10.65[/td] [td class="xl29"]Esso 2000[/td] [/tr] [tr style="height: 12.75pt;" height="17"] [td class="xl26" style="height: 12.75pt;" x:num="" height="17"]46.25[/td] [td class="xl26" x:num=""]502.30[/td] [td class="xl26" x:num="10.860540540540541" x:fmla="=B8/A8"]10.86[/td] [td class="xl29"]Esso 2000[/td] [/tr] [tr style="height: 12.75pt;" height="17"] [td class="xl26" style="height: 12.75pt;" x:num="" height="17"]38.80[/td] [td class="xl26" x:num=""]445.50[/td] [td class="xl26" x:num="11.481958762886599" x:fmla="=B9/A9"]11.48[/td] [td class="xl29"]Esso 2000 - Tyre Check[/td] [/tr] [tr style="height: 12.75pt;" height="17"] [td class="xl26" style="height: 12.75pt;" x:num="" height="17"]41.91[/td] [td class="xl26" x:num=""]434.20[/td] [td class="xl26" x:num="10.360295872106896" x:fmla="=B10/A10"]10.36[/td] [td class="xl29"]Esso 2000 - Tyre Check[/td] [/tr][/table]
Seems to be improving but suddenly dropped again.
I think could be my driving pattern. Tends to rev slightly more when moving off but still trying to maintain within 2500rpm.
And i also let my wife drive which might contribute to the different driving pattern too.
wah.. u can plot graph already..
zhuzhumao- Junior Member
Re: Metal Bronzee
by lakopi 30th September 2009, 11:04 am
pessimizt wrote:Hi lakopi, did they do a shine test for you before CS-II ?
They did not do on mine so would like to check with other bros who had done or doing CS-II, please get them to do shine test BEFORE CS-II and update. Thanks in advance !
No... i did not... it wasn't in my mind whether i should do a shine test before the application of CS-II, i've already made my mind to go for it after consultation from 2 of my friends (both have diff cars) and they were very happy with the product and service, so i've no doubt for doing so too. Try it for yourself and see the difference. If you don't find it good, you can don't go there any more ..
... check out their website and go to their blog... http://www.unique1995.com.sgYou should also visit the topic rather than here ? http://www.ceratoforte.forumotion.com/car-grooming-section-polish-wax-cleaning-products-f22/cs-ii-paint-preservation-system-t1486-50.htm#64486
good luck
lakopi- Newbie
Re: Metal Bronzee
by joepele 30th September 2009, 11:39 am
I was juz thinking...
CSII or Autoglym with High Def wax.
http://www.highdefinitionwax.com/
Coz these guys are giving quite a good px to groom with this.
http://www.ceratoforte.forumotion.com/car-servicing-section-plugs-filters-eos-coolants-etc-f27/promotion-for-this-hari-raya-season-enjoy-this-great-offer-t1415.htm
Touch up @ 38 bucks...
*A tube of this HD wax is almost 200 bucks.
CSII or Autoglym with High Def wax.
http://www.highdefinitionwax.com/
Coz these guys are giving quite a good px to groom with this.
http://www.ceratoforte.forumotion.com/car-servicing-section-plugs-filters-eos-coolants-etc-f27/promotion-for-this-hari-raya-season-enjoy-this-great-offer-t1415.htm
Touch up @ 38 bucks...
*A tube of this HD wax is almost 200 bucks.
joepele- Senior Member
Re: Metal Bronzee
by pessimizt 30th September 2009, 11:41 am
Actually i have already done CS-II about 2-3 weeks ago and i must also say their service is good.
pessimizt- Senior Member
Re: Metal Bronzee
by kqkhlj 30th September 2009, 10:18 pm
pessimizt,
do you know the colour code for metal bronze? need to spray the reverse sensor before installation.
my car will reach me latest by next week liao, we go jb together to get the leg light fixed mid oct cos i still need to familarise myself with the new car first. BTW, i intend to join in the trip to desaru together with the rest.
Join in the fun lah.
do you know the colour code for metal bronze? need to spray the reverse sensor before installation.
my car will reach me latest by next week liao, we go jb together to get the leg light fixed mid oct cos i still need to familarise myself with the new car first. BTW, i intend to join in the trip to desaru together with the rest.
Join in the fun lah.
kqkhlj- Junior Member
Re: Metal Bronzee
by pessimizt 1st October 2009, 8:50 am
kqkhlj wrote:pessimizt,
do you know the colour code for metal bronze? need to spray the reverse sensor before installation.
my car will reach me latest by next week liao, we go jb together to get the leg light fixed mid oct cos i still need to familarise myself with the new car first. BTW, i intend to join in the trip to desaru together with the rest.
Join in the fun lah.
Metal Bronze colour is DO (not zero)
PMed you as well.
pessimizt- Senior Member
Re: Metal Bronzee
by Forte899 1st October 2009, 9:52 am
Hi Bros,
Just to confirm, Car Registration for Metal Bronze is it under primary color "Brown"? Thanks
Just to confirm, Car Registration for Metal Bronze is it under primary color "Brown"? Thanks
Forte899- Junior Member
Re: Metal Bronzee
by pessimizt 1st October 2009, 9:55 am
Where did you see this ? Onemotoring or Invoice ?
Just logged into OneMotoring and also see the Primary Colour is Brown.
Just logged into OneMotoring and also see the Primary Colour is Brown.
pessimizt- Senior Member
Re: Metal Bronzee
by arkaraka 1st October 2009, 10:01 am
pessimizt wrote:Where did you see this ? Onemotoring or Invoice ?
Just logged into OneMotoring and also see the Primary Colour is Brown.
mine is brown in onemotoring.com
also Metal Bronzeeeee
arkaraka- Junior Member
Re: Metal Bronzee
by Forte899 1st October 2009, 10:05 am
arkaraka wrote:pessimizt wrote:Where did you see this ? Onemotoring or Invoice ?
Just logged into OneMotoring and also see the Primary Colour is Brown.
mine is brown in onemotoring.com
also Metal Bronzeeeee
I saw it in onemotoring.com, so to say it's correct color lah. Thanks
Forte899- Junior Member
Re: Metal Bronzee
by arkaraka 1st October 2009, 10:14 am
Forte899 wrote:arkaraka wrote:pessimizt wrote:Where did you see this ? Onemotoring or Invoice ?
Just logged into OneMotoring and also see the Primary Colour is Brown.
mine is brown in onemotoring.com
also Metal Bronzeeeee
I saw it in onemotoring.com, so to say it's correct color lah. Thanks
Bro Forte899
Your shipment here? When collecting? EX?
I should be collecting in the next few days...
arkaraka- Junior Member
Re: Metal Bronzee
by Forte899 1st October 2009, 10:44 am
arkaraka wrote:Forte899 wrote:arkaraka wrote:pessimizt wrote:Where did you see this ? Onemotoring or Invoice ?
Just logged into OneMotoring and also see the Primary Colour is Brown.
mine is brown in onemotoring.com
also Metal Bronzeeeee
I saw it in onemotoring.com, so to say it's correct color lah. Thanks
Bro Forte899
Your shipment here? When collecting? EX?
I should be collecting in the next few days...
Mine EX (A) just registered, probably collecting this few days also.
Forte899- Junior Member
Re: Metal Bronzee
by zujzuj 3rd October 2009, 11:04 pm
Just went to do balance payment for my MB EX !
collecting ride on 19th oct
collecting ride on 19th oct
zujzuj- Newbie
Re: Metal Bronzee
by zujzuj 3rd October 2009, 11:12 pm
Just went to do balance payment for my MB EX !
collecting ride on 19th oct
collecting ride on 19th oct
zujzuj- Newbie
Re: Metal Bronzee
by ong 6th October 2009, 8:21 am
zujzuj wrote:Just went to do balance payment for my MB EX !
collecting ride on 19th oct
humm why so late .....
ong- Member
Re: Metal Bronzee
by pessimizt 8th October 2009, 9:53 am
Shux........just saw a small roach in my ride this morning......squashed it with a tissue paper immediately.......now really scared that more are breeding inside......argh........ 
Gonna go get pandan leaves later and place around the cabin and boot !
Gonna go get pandan leaves later and place around the cabin and boot !
pessimizt- Senior Member
Re: Metal Bronzee
by astroboy28 9th October 2009, 4:10 pm
i also saw one inmy car few weeks ago.. then i put damm lots of pandan in my car.. i was smellin like pandan cake but tink its useful as i didnt c anymore those pests le..
astroboy28- Junior Member
Re: Metal Bronzee
by pessimizt 9th October 2009, 6:44 pm
Astroboy, check with you, did you put in boot as well ?
pessimizt- Senior Member
Re: Metal Bronzee
by joepele 9th October 2009, 7:13 pm
Anyway, do remember, these things dry up pretty fast too...
Pls use a bag to store it... else... you are gonna end up with a messy pandan car...
Pls use a bag to store it... else... you are gonna end up with a messy pandan car...
joepele- Senior Member
Re: Metal Bronzee
by pessimizt 9th October 2009, 8:00 pm
Bingo ! Thanks for advice ! Have a great weekend !
pessimizt- Senior Member
Page 6 of 10 • 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Similar topics» My Mr. Metal Bronze
» My Metal Bronzete
» Joe's Metal Bronze SX
» METAL BRONZE IN THE USA
» JasLovesForte's Metal Bronze
» My Metal Bronzete
» Joe's Metal Bronze SX
» METAL BRONZE IN THE USA
» JasLovesForte's Metal Bronze
Page 6 of 10
Permissions in this forum:
You cannot reply to topics in this forum|
|
|
» APP Leading Website Generator
» check-up
» Blu-ray to iPad Ripper lift Blu glimmer DVD movies quest of iPad
» ubiquitous
» South african indian dating. Nz internet dating.
» WHAT CREEPY IDEA ON YOUTUBE HASN'T ALREADY BEEN DONE YET?
» buy facebook fan f8
» division