My super Bright Silver precious!

Had my Roadruns Grille respray to match the body color.

now it looks much nicer than the old matt look! thumbs up!

lawrenceke wrote:now it looks much nicer than the old matt look! thumbs up!

Yup, I agree with u. Tot of it for quite some time before I go for respray.

the color if is perfect match will be nicer right?

walau......nice

but am staying with black......

JuanST wrote:but am staying with black......

Yup, it's better u stay with black cos you have Bk to back you back. Unlike me do not have BK, so will look weird if I dun respray it.

turbo4ev wrote:the color if is perfect match will be nicer right?

Ya I have made a complain to them why colour not match. But come to think of it, I find that a bit of different tone will also be better to distinguish between grill and body.

greatgazoo wrote:

JuanST wrote:but am staying with black......

Yup, it's better u stay with black cos you have Bk to back you back. Unlike me do not have BK, so will look weird if I dun respray it.

u can always get the front lip.....

looks like cibic lei

wah..... bro..... muz really say it is much nicer now......

now i must say it looks lyk a honda civic look-alike model !
hahahahsh
=/

fierce...

chio man...

Nice bro, I tot there's a new forte in the mscp until I check the plate number.

Just do some upgrades to my ride

waaaa!!!! gazooo.... very very nice twin exhaust... swee laaa...

I like ur twin exhaust too .... wat's the damage? Gazoo, did u import in and DIY?

hey gazoo, i did the incus tip same day as u but went off early.
too bad wasnt able to meet u in person.
had discussed with david about installing it for sometime ever since i saw one of the avante owner using it ...but was undecided cos might not be able to install my rear BK bumper..well, couldn't resist it in the end so did it anyway

pimp my ride wrote:hey gazoo, i did the incus tip same day as u but went off early.
too bad wasnt able to meet u in person.
had discussed with david about installing it for sometime ever since i saw one of the avante owner using it ...but was undecided cos might not be able to install my rear BK bumper..well, couldn't resist it in the end so did it anyway

u mean ur C&C body kit? And now u did this Twin exhaust which I have? Do u know that the C&C bumper can't fit this twin exhaust.

Potatoes wrote:I like ur twin exhaust too .... wat's the damage? Gazoo, did u import in and DIY?

prepare to pay for the price if you really like it. Normal price $500 plus, muffler tip plus Roadrun diffuser. If there is around 5 or more ppl like it, I will hold GB for around $400 plus. I did it at MCD, and this is the last time MCD bringing in this muffler tip.

As pimp my ride had mention, alot of avante are aiming for this and there is limited stock.

greatgazoo wrote:

pimp my ride wrote:hey gazoo, i did the incus tip same day as u but went off early.
too bad wasnt able to meet u in person.
had discussed with david about installing it for sometime ever since i saw one of the avante owner using it ...but was undecided cos might not be able to install my rear BK bumper..well, couldn't resist it in the end so did it anyway

u mean ur C&C body kit? And now u did this Twin exhaust which I have? Do u know that the C&C bumper can't fit this twin exhaust.

Of course lah, the problem is the bk diffuser. I'll fix the front kit & sideskirt. If mach cant separate the bk diffuser then screw it, either i find a shop that can do it or just sell off the rear kit. The wait is killing me. Anyway i've no regrets with the incus twin, it looks damn sweet on my ride.

Good that you like it very much.

pimp my ride wrote:

greatgazoo wrote:

pimp my ride wrote:hey gazoo, i did the incus tip same day as u but went off early.
too bad wasnt able to meet u in person.
had discussed with david about installing it for sometime ever since i saw one of the avante owner using it ...but was undecided cos might not be able to install my rear BK bumper..well, couldn't resist it in the end so did it anyway

u mean ur C&C body kit? And now u did this Twin exhaust which I have? Do u know that the C&C bumper can't fit this twin exhaust.

Of course lah, the problem is the bk diffuser. I'll fix the front kit & sideskirt. If mach cant separate the bk diffuser then screw it, either i find a shop that can do it or just sell off the rear kit. The wait is killing me. Anyway i've no regrets with the incus twin, it looks damn sweet on my ride.

I have personally spoke with Mach's boss before.. he got point that current C&C rear diffuser can be alter easily by another 3rd party shop.. but depends the shop wants to do it anot is 1 thing.

which shop can do it? I dunno go ask ard..

dont ask me for the boss no. cause u know I definately wont give.

Good luck on your search.. remember to share ard here.. =)

Terrier wrote:

pimp my ride wrote:

greatgazoo wrote:

pimp my ride wrote:hey gazoo, i did the incus tip same day as u but went off early.
too bad wasnt able to meet u in person.
had discussed with david about installing it for sometime ever since i saw one of the avante owner using it ...but was undecided cos might not be able to install my rear BK bumper..well, couldn't resist it in the end so did it anyway

u mean ur C&C body kit? And now u did this Twin exhaust which I have? Do u know that the C&C bumper can't fit this twin exhaust.

Of course lah, the problem is the bk diffuser. I'll fix the front kit & sideskirt. If mach cant separate the bk diffuser then screw it, either i find a shop that can do it or just sell off the rear kit. The wait is killing me. Anyway i've no regrets with the incus twin, it looks damn sweet on my ride.

I have personally spoke with Mach's boss before.. he got point that current C&C rear diffuser can be alter easily by another 3rd party shop.. but depends the shop wants to do it anot is 1 thing.

which shop can do it? I dunno go ask ard..

dont ask me for the boss no. cause u know I definately wont give.

Good luck on your search.. remember to share ard here.. =)

true, when i look at the picture of the rear BK i thought that it might be possible to remove the C&C diffuser & replace it with another which is why i took the risk...however i find it so ironic that if the mach's boss himself admits that it can easily be altered, i dont see any reason why they cant simply do it for me when the time comes for my BK installation? Anyways no worries cos there's so many shop specialised in BK out there

Pimp my ride, did you also do up the Roadrun diffuser or only the exhaust tip?

greatgazoo wrote:Pimp my ride, did you also do up the Roadrun diffuser or only the exhaust tip?

...with the diffuser for the twin.

Tdy i went down to MCD and the guy told me its near impossible to cut thru the diffuser of the C&C BK cos its highly possible that its made of fiberglass and might crack when cut...furthermore the BK is fitted over the original bumper so if cut will have cut thru 2 layers also...haiz...super sianz...

hmm, at least ur bumper is "enhanced"

leedevil wrote:Tdy i went down to MCD and the guy told me its near impossible to cut thru the diffuser of the C&C BK cos its highly possible that its made of fiberglass and might crack when cut...furthermore the BK is fitted over the original bumper so if cut will have cut thru 2 layers also...haiz...super sianz...

bro, is the diffuser really made of fibreglass? i really doubt that.

if ur rear bk already installed, then should remove 1st before doin any cutting...why must cut 2 layers? Must go for 2nd , 3rd opinions, go to a bk expert ...hmm nowadays nothing is impossible if u have $$$

it's not made of fibreglass, that for sure.....

nothing wrote:it's not made of fibreglass, that for sure.....

hm....then watz the material?

nothing wrote:it's not made of fibreglass, that for sure.....

hm....then watz the material?

Anyone done up the C & C BK yet ?

Hoping to get a glance at it .

While waiting for mine

theres quite a few...browse around and u can see some different colour with C&C BK...

Sorry to all for the misunderstanding...actually i sms the mach boss and was told that e diffuser is ABS material so means its cutable...to cut thru 2 layers meaning the original diffuser of the bumper and also the BK version of diffuser...so thats 2 layers...and i jus got my own version of twin exhaust done at MCD...standby for pics..

gazoo, is it possible to change the lower bumper mesh grill for OPC car? I mean without removing the front bumper cos of the stupid seal? Does anyone know of any shop that can do it?

pimp my ride wrote:gazoo, is it possible to change the lower bumper mesh grill for OPC car? I mean without removing the front bumper cos of the stupid seal? Does anyone know of any shop that can do it?

Yours OPC car? But I tot in the pic your car plate is rectangular in shape?

greatgazoo wrote:

pimp my ride wrote:gazoo, is it possible to change the lower bumper mesh grill for OPC car? I mean without removing the front bumper cos of the stupid seal? Does anyone know of any shop that can do it?

Yours OPC car? But I tot in the pic your car plate is rectangular in shape?

i changed it to rectangle liao last mth. change shape only hor not the colour...

pimp my ride wrote:
i changed it to rectangle liao last mth. change shape only hor not the colour...

Whatz the procedure to change cos mind also OPC.

pimp my ride wrote:
i changed it to rectangle liao last mth. change shape only hor not the colour...

Did you broke the opc seal and change the original squarish car plate to a rectangular one or did it came with the rectangular car plate?

Guys, u can go to Wee motors to change to rectangle plate. They have the garnish too. 1st u need to go for the seal inspection at vicom, then u need to get the workshop (Wee motor) stamp on the LTA application form to get approval to break the seal.

pimp my ride wrote:Guys, u can go to Wee motors to change to rectangle plate. They have the garnish too. 1st u need to go for the seal inspection at vicom, then u need to get the workshop (Wee motor) stamp on the LTA application form to get approval to break the seal.

Do I have to call and make an appointment or can I just walk-in to Vicom to do the inspection?

How much does all this cost?
Btw how did you mange to cover up the hole in the bottom grill made by your previous opc seal?

Sorry to ask you so many question.

jackohy wrote:How much does all this cost?
Btw how did you mange to cover up the hole in the bottom grill made by your previous opc seal?

Sorry to ask you so many question.

I suppose he did nothing to the damage hole make by that stupid metal that's y he wan to change the mesh rite
Cos we can't do anything also except to change the whole mesh.

greatgazoo wrote:

pimp my ride wrote:Guys, u can go to Wee motors to change to rectangle plate. They have the garnish too. 1st u need to go for the seal inspection at vicom, then u need to get the workshop (Wee motor) stamp on the LTA application form to get approval to break the seal.

Do I have to call and make an appointment or can I just walk-in to Vicom to do the inspection?

bro, u have to go LTA and get the application form to do the seal inspection.
also u have to check with Wee if they can do for u that day cos sometime they got too many car.

jackohy wrote:How much does all this cost?
Btw how did you mange to cover up the hole in the bottom grill made by your previous opc seal?

Sorry to ask you so many question.

dont ask me the cost because my memory damn bad one haha. i think shld be around 200
the red plate, i order from Moses, i think 30 plus
the garnish plus the labour to break the seal and fix the plate, i think about 100++
LTA & vicom less than 50?

i did'nt cover the hole, actually its really unnoticeable. Nobody has noticed it. Its just that i prefer the smaller hole type of mesh.

greatgazoo wrote:

jackohy wrote:How much does all this cost?
Btw how did you mange to cover up the hole in the bottom grill made by your previous opc seal?

Sorry to ask you so many question.

I suppose he did nothing to the damage hole make by that stupid metal that's y he wan to change the mesh rite
Cos we can't do anything also except to change the whole mesh.

in order to change the mesh, the front bumper needs to be removed. With the bloody seal, its impossible.

Silly me, i did'nt thought about changing the mesh at that time. I should have done the mesh before sending it back to vicom for resealing. Cos LTA give u allowance of 1 week to a month for the workshop to fix your car.