Forte Owner's Group Emblem

impact2001 wrote:Wah... scarecloud... you awesome.. but i think u need to resize ur image.. hahaha.. too big liao..

yeah, too big
edited...

scaredcloud, send me the polo tee template?

the empty template.. i see what i can come out with..

dandeana21 wrote:

scaredcloud wrote:let's look at some polo T mock up.
the front log can be done with embroidery.

i personally think that it would be nicer if we leave the back blank.

eeehh.. how abt leaving the front blank and move the logo to the sleeve?
And prob put one of the logo at the bottom left/right side of the t-shirt oso? tot it will be pretty cool..

at ur service ma'm

here's the template for you guys to download

https://img.photobucket.com/albums/v121/scaredcloud/Polo_T_Template.jpg

scaredcloud wrote:

dandeana21 wrote:

scaredcloud wrote:let's look at some polo T mock up.
the front log can be done with embroidery.

i personally think that it would be nicer if we leave the back blank.

eeehh.. how abt leaving the front blank and move the logo to the sleeve?
And prob put one of the logo at the bottom left/right side of the t-shirt oso? tot it will be pretty cool..

at ur service ma'm

cool!! hmm.. how abt the logo on the sleeve shrink a little smaller or maybe use our F.O.G.S name? and prob we can add a line or 2 down from the top to bottom @ the same side of the bottom logo.. the bottom logo maybe can also expand a bit bigger..

is it oso ok if the red can be a bit brighter?

heee... solli ah.. juz visualising how it can look..

scaredcloud wrote:

dandeana21 wrote:

scaredcloud wrote:let's look at some polo T mock up.
the front log can be done with embroidery.

i personally think that it would be nicer if we leave the back blank.

eeehh.. how abt leaving the front blank and move the logo to the sleeve?
And prob put one of the logo at the bottom left/right side of the t-shirt oso? tot it will be pretty cool..

at ur service ma'm

Wow cool, I like it. I think so far this is the coolest logo for FOGS plus unique.

Front: issit possible to put the FOGS at the Top left chest to look more obvious instead at the bottom.
Back: remain the same unless you all want the logo to be prominent or stand out, you can put below the forteresses.
Sleeves: can either put kia logo or number.

yah, i like the back design very much also

Ya i agree! The logo is damn cool! And yes, i agree with greatgazoo
that the logo FOGS to be shifted to the top left chest.
Back can remain the same as it looks very nice too!
As for the sleeve, perhaps we can put Kia logo or just the word "FORTE"?

Terrier wrote:Good ar.. nice~ but member since is it a must to put in?

my suggestion is remove Forte Plate No. and Member Since:

with the background car.. there got a Plate No. written Forte.. maybe erase it with white background.. so we can just write our plate no. over there..

Something fresh!

i also dont want to put number plate and i dont want a member since: i want everyone to be equal and no who come first or last or join early.

want to prevent a "lao jiao has more say/power/control" in this group... everyone is equal so there should be a member since/ member no. and licence plate for sensitive purpose.


hope u all understand

Thanks to impact for his hard work !!

scaredcloud wrote:let's look at some polo T mock up.
the front log can be done with embroidery.

i personally think that it would be nicer if we leave the back blank.

Hi, thanks for ur effort, the shirt is very nicely design!!

cheers

I support behind leave blank.

Hi Bros & Sis,It's very difficult to please everyone.... Impact, Juz@kid, Scaredcloud... they are doin the draft for these group without any extra charges, so lets make job easier for them k....

hmm... wait.. the more we designed the cost will be high.. and more color it is.. the cost is even higher!!

so everyone lets just standardize up to 2colors.. I will suggest Red & white..

As for the designed.. are we going for sewing type or hot printing type?? if sewing type.. its good that we limit up to 2 e.g. right sleeves for No. and back for the design..

If hot printing.. we can limit up to 3-4, in msia printing the cost is roughly RM60-80.. the more we print the cost will be cheaper..

Tish/impact.. do you think we shld have a poll on design, color, and type of print (sew or hot-print). If so, maybe you can start the poll and sticky it on.. ^^

Although is at no extra charge, but still you will need to pay for the shirt and decal

If we are to put our numbers, it means that the cost will be higher due to different number for every single piece of shirt the vendor has to print.
But I don't mind paying for it since the design is so NICE! In fact can wear it every weekend

Terrier wrote:hmm... wait.. the more we designed the cost will be high.. and more color it is.. the cost is even higher!!

so everyone lets just standardize up to 2colors.. I will suggest Red & white..

As for the designed.. are we going for sewing type or hot printing type?? if sewing type.. its good that we limit up to 2 e.g. right sleeves for No. and back for the design..

If hot printing.. we can limit up to 3-4, in msia printing the cost is roughly RM60-80.. the more we print the cost will be cheaper..

Tish/impact.. do you think we shld have a poll on design, color, and type of print (sew or hot-print). If so, maybe you can start the poll and sticky it on.. ^^

As I have mention eariler, I don't mind getting a better quality shirt and print and pay more if the design is nice and can last for a long time

Actually we can start polling already and I wanted to start the poll but don't how to do it Unless majority does not agree with the design then we have to start from scratch. Most importantly majority like it.

Can anyone here teach me how to do the polling?

wait for another day if the poll is gonna start anytime soon...
i have 2 more designs to put in tonight, based on the feedback and comments from all the bros n sis...

seriously for me, since we can afford a car n fork out more money to customized on accessories/cosmetic, i dun mind paying even though e t shirt would cost me $50each. after all it will be e club t shirt, u need to be comfortable when u wearing n both shirt n e person wearing should look nice.

if everyone preferred better quality and long lasting.. i will bid for sew-type instead of hot-print.

Hot-print can last abt a year provided depends on how u maintain it! imagine whenever you wash it, u need to turn opposite side (inside out) and wash. You cannot use machine wash too, it will damage the print.

Sew type.. who cares.. you see Giordano frog can still swim inside the washing machine and smile at you when you are hanging your clothes.

Sewing type cost will vary from SGD$50-80 depends on no. of colors, design and quality of the polo tee.

Still need to get vendor that can provide such services and give us real good discount.

My ex army camp polo tee, by just printing the Unit Logo at front chest cost abt $20 per polo tee. so imagine we got a big logo behind =)..

who got lobang.. maybe can start asking..

Bro, nice design.. like a give some suggestion like...

Front still remain with onli e 000 will be leave blank..


Back if onli below e Forteress if u could add e word "Est. 2009" since e club is founded n set up in 2009
[/quote]

Very well design. i agree with Jus@Kid for the front remain same and 000 to leave blank.

greatgazoo wrote: Although is at no extra charge, but still you will need to pay for the shirt and decal

If we are to put our numbers, it means that the cost will be higher due to different number for every single piece of shirt the vendor has to print.
But I don't mind paying for it since the design is so NICE! In fact can wear it every weekend

bro.. me not in favour putting member number/car plate on e t shirt. t shirt shld be worn e same without e number by every club member. but for car decal, i totally supported e idea of putting member no. as shown in e registry thread as to show how early drivers register their carz. it oso tell e club n other car club, e increasing number of club member we hv. at all times, e member number shall not be use as rank to say they r more lao chiao....

Terrier wrote:if everyone preferred better quality and long lasting.. i will bid for sew-type instead of hot-print.

Hot-print can last abt a year provided depends on how u maintain it! imagine whenever you wash it, u need to turn opposite side (inside out) and wash. You cannot use machine wash too, it will damage the print.

Sew type.. who cares.. you see Giordano frog can still swim inside the washing machine and smile at you when you are hanging your clothes.

Sewing type cost will vary from SGD$50-80 depends on no. of colors, design and quality of the polo tee.

Still need to get vendor that can provide such services and give us real good discount.

My ex army camp polo tee, by just printing the Unit Logo at front chest cost abt $20 per polo tee. so imagine we got a big logo behind =)..

who got lobang.. maybe can start asking..

U mean embroidary..... it would be very prickly for the wear.... not so much for the women, but for the men!!!!

embroidery can last longer n looks nicer compare to iron on material wic u hv to be careful wen ironing...

I'm ok with anything as long as good quality lah... don't wanna spent S$50 on shirt tat can only last a few month then torn... got hole liao....

ok bah got hole... at least body feel more cooling or u pai sey

Juz@kid wrote:ok bah got hole... at least body feel more cooling or u pai sey

Wah lau.... cooling ar... Thank You but I don't wan hor.... Ya pai say ya.... later ppl can see

i oso dowan... later got itchy finger cum n poke or make hole becum bigger

please do not use t-shirts from army market.
those tees shrink and expand at all the wrong places.

dats a sure thing coz i oso dowan dos shrink n expand type of shirt. dun mind paying abit extra for a good investment

will the shirt be dry-fit??
heeheheee

OMGz.. just send a msg but dunno why not updated in the thread =(( must retype again!!..

Dont worry the shirt definately not getting from ARMY market.. what i meant is my army camp used to mass order our unit polo tees at $20 with just a 3cm by 3cm logo for embroidery.

If we are going for embroidery, we need alot of members willing to buy also.

besides that, the cost of embroidery will be very high even though we get mass order.. WHY?? yes im telling u why now..

If we decided to put member no. at the sleeves means there will be running no. from 001 to xxx. Current embroidery market is sew by machine which they set the machine with the design and mass sew it. Which means the running member no. will be that extra costs!! because they have to first mass sew the front and back, after that manual sew the no. 1 by 1.

As I said before, my army camp polo tees are standard logo which they mass sew it at the price of $20 (that time we order abt 100 pieces different sizes). Now im wondering how much will this really costs.. Besides that, if choose a good quality of polo tees will be added to the costs aso. hoho I wont knwo what is the total sum but if $100 you guyz still willing to pay?

haahaahaa, i dont think will add up to $100.
But is it neccessary to put member number?

der always another lobang wic is cheaper... dun really need to pay i S$, der oso RM.... a few good bro went jb to check quite a number of things der n share in here, therefore hv to give them e credit for all e hassle n trouble...

Ya..i also dun think it's necessary to put member no.
Just remain asthe latest design is very good enuff!

I will definitely opt for embroidery! Think it's more lasting!
Anyway, it's our very first club tee, we have to wear with pride! Keke..

Juz@kid wrote:

greatgazoo wrote: Although is at no extra charge, but still you will need to pay for the shirt and decal

If we are to put our numbers, it means that the cost will be higher due to different number for every single piece of shirt the vendor has to print.
But I don't mind paying for it since the design is so NICE! In fact can wear it every weekend

bro.. me not in favour putting member number/car plate on e t shirt. t shirt shld be worn e same without e number by every club member. but for car decal, i totally supported e idea of putting member no. as shown in e registry thread as to show how early drivers register their carz. it oso tell e club n other car club, e increasing number of club member we hv. at all times, e member number shall not be use as rank to say they r more lao chiao....

Hi guys, I just wanna stress that the numbers are purely a signature for identifying that you come from Forte club and not in ranking. Numbers will be freely selected by you to get your favourite number to represent yourself in club Forte.

saturnz^83 wrote:Ya..i also dun think it's necessary to put member no.
Just remain asthe latest design is very good enuff!

I will definitely opt for embroidery! Think it's more lasting!
Anyway, it's our very first club tee, we have to wear with pride! Keke..

I personally think that with the number you will feel even proud of it cos each an everyone has got their own signature polo-tee jus like the polo ralph with numbers behind. Cool!

polo ralph with number.. because their no. are fixed no. this is why they can mass sew it together.. as i said it before.. if a polo tee worth $100 will u pay for it??

$100 u can buy a good branded polo tees already =)

Terrier wrote:polo ralph with number.. because their no. are fixed no. this is why they can mass sew it together.. as i said it before.. if a polo tee worth $100 will u pay for it??

$100 u can buy a good branded polo tees already =)

Our polo tee sure wont hit $100 one cos no brand. The only brand I tink is our FOGS brand

haha.. hard to say.. i used to print these type of polo tees for my camp.. after the cost is so high.. we only can go for hot-printing.. which is sucks!!

So you prefer sewing one? I dun mind paying more for a sew one rather than the hotprinting which can't last long.

hehe yea.. i will opt for sewing.. but still depend on cost.. cause usually i will buy 2 instead of 1.

So anybody here has got lobang for our Forte club polo Tee which use sewing?

i dont think so.. unless everyone start using our good friend google..

maybe everyone who is working and wore company polo tee.. maybe can ask the HR to share the company info..

ok, here are some final designs.

For the front side
NOTE: The number should not be there, I think we should scrap the number printing on sleeve's idea.

#1 Original idea with Logo on left chest


#2 Logo on left sleeve


#3 Logo on lower left


Here's the same series, but added Singapore flag
(I thought it will look more like Rally Polo, kinda cool )

#4 Original idea with Logo on left chest c/w Flag


#5 Original idea with Logo on left chest c/w Flag on sleeve


#6 Logo on left sleeve c/w Flag

Team Singapore!!! heh

Design 1 and 5 gets my vote!

here are the backs

#1 Original design (no numbers on sleeve)


#2 Simplified


#3 Simplified with flag (so the front has no flag)

And... I vote for embroidery